
PERIPRO® Hose Pump Chemical Version
Highest reliability as well as safety in conveying and dosing corrosive media
Especially in the chemical industry, process reliability plays a central role. The PERIPRO® hose pump in chemical design offers you the highest reliability even in conveying corrosive media with maximum dosing accuracy at the same time.
The challenges of the media to be conveyed in the chemical industry could not be more varied. The numerous different materials of the hose enable you to transfer even corrosive products safely. With the PERIPRO® hose pump in chemical design, you can convey and dose, for example, corrosive media such as hydrochloric acid, sulphuric acid or ferric chloride in compliance with the highest safety standards. The dosing accuracy of the hose pumps is particularly high, with a deviation of less than one percent.
Safe and continuous conveying and dosing
In order to ensure maximum safety and easy maintenance, the wear parts of the hose pumps have been reduced to an absolute minimum. PERIPRO® pumps have no mechanical seals or valves and require only small amounts of lubricant. Therefore, the peristaltic pumps are particularly easy to service and optimally suited for continuous operation. The large corrosion-resistant rollers also increase the service life of the hose. This significantly reduces your downtime and service times. Hence, you save both time and money. Nothing stands in the way of safe as well as continuous conveying and dosing of your products in the chemical industry.
Advantages
Technique

- Sensor for hose leakage
- Corrosion-resistant rollers, hoses and connections
- High metering accuracy (deviation less than one percent)
- High serviceability
- Very low lubricant consumption
- Gentle and reversible pumping possible
- Long service life of the hose thanks to large rollers
| Name | Pressure max. (bar) | Capacity max. (m³/h) | Operating rotational speed (rpm) |
|---|---|---|---|
| C10/0.1 | 10 | 0.18 | 80 |
| C10/0.3 | 10 | 0.48 | 80 |
| C10/0.7 | 10 | 1.08 | 80 |
| C10/1.4 | 10 | 1.75 | 70 |
| C10/2.7 | 10 | 3.40 | 70 |
| C10/5.1 | 10 | 6.80 | 70 |
| C10/11.1 | 10 | 12.40 | 60 |
| C10/23.7 | 10 | 21.30 | 45 |
| C10/66 | 10 | 39.00 | 30 |
Further sizes and technical data on request.

Worldwide service and support for your pump and system
Our service and support do not end with the purchase. From consultation, spare parts and maintenance to the repair and modernisation of your pump - we support you right from the start.
Thanks to our worldwide service network, we are ready for you around the clock in case of an emergency.
Applications PERIPRO® hose pump chemical version
FAQ peristaltic pumps
Peristaltic pumps are particularly suitable for pumping aggressive, abrasive, highly viscous or shear-sensitive media. Typical areas of application include the chemical and process industries, water and wastewater technology, mining and industrial applications with high operational safety requirements.
PERIPRO® peristaltic pumps from NETZSCH Pumps & Systems impress with their robust design, simple sub-assembly and reliable delivery of even the most difficult media. Peristaltic pumps offer you extremely high suction power with minimal maintenance. In addition, they do not require wear-intensive valves or mechanical seals. The only wear part is the hose, which is easy to replace.
Peristaltic pumps can be used to convey low-viscosity to highly viscous media, including slurries, suspensions, pastes and media with a high solids content. Even aggressive or corrosive media can be conveyed safely.
Yes, peristaltic pumps are self-priming and have very good suction behaviour. They can start up reliably even with a dry suction line and are therefore suitable for applications with changing fill levels.
Peristaltic pumps require little maintenance. The main wear part is the hose, which is replaced regularly depending on the application and operating conditions. Replacing the hose is quick and easy.
All relevant original spare parts for peristaltic pumps are available from NETZSCH Pumps & Systems. These include, in particular, hoses, rollers and bearings. All spare parts are precisely matched to the respective pump design and ensure reliable and safe operation.
The correct spare part can be identified by the machine number, serial number, or item number. Spare parts lists, technical drawings and the operating and maintenance instructions also assist. Alternatively, the NETZSCH Pumps & Systems service team can provide expert advice on selecting the right original spare part.
PERIPRO® peristaltic pumps are available with different hose materials, which are adapted to the respective pumped medium. Selection is made on an application-specific basis to ensure chemical resistance and optimal service life.
The service life of the hose depends on factors such as the medium, pressure, speed and operating time. A long service life can be achieved through correct design and adapted operating parameters.
Yes, peristaltic pumps are very well suited for dosing applications. The almost linear delivery characteristic enables precise and reproducible dosing, even under changing process conditions.
Peristaltic pumps operate efficiently, especially when pumping demanding media. An optimised design helps to reduce energy consumption and operating costs.
The experts at NETZSCH Pumps & Systems will assist you in selecting, designing and integrating the right peristaltic pump. Based on your process data, a technically and economically optimal solution will be developed.











