ESPCP pump system in innovative design for energy savings and fluid monitoring, ideal for offshore and deviated well applications.
NEMO® PROGRESSING CAVITY PUMPS

ESPCP Pump System 

Reduce operating costs thanks to progressing cavity pump systems with underground drives


Energy savings, high reliability and permanent monitoring of the dynamic fluid level: No other system worldwide offers all of this in oil and gas production except for the ESPCP pump systems from NETZSCH. They are particularly suitable for highly deviated wells and offshore applications. 

ESPCP is the abbreviation for Electrical Submersible Progressing Cavity Pump. The rodless system combines the advantages of a submersible permanent magnet motor (PMM) with those of PCP technology. By removing the sucker rod and driving it with a downhole engine, an alternative PCP system is created. This avoids the typical problems of disconnected sucker rods and pipe failures.

ESPCP Pump System: Energy-saving and highest reliability

The ESPCP pump system is an energy-saving solution with excellent reliability in all applications. It is equipped with numerous downhole sensors. They provide information on the pump’s pressure, temperature, vibration, and motor temperature. Hence, you can continuously monitor the fluid level and react to possible changes as quickly as possible. It also enables high flow rates in complex (deviated and horizontal) wells and fluid conditions. In addition, the ESPCP progressive cavity pump system reduces your operating costs thanks to its low failure rate.

Advantages

Low operating costs and low maintenance
Sensors
Downhole sensors allow permanent monitoring of the fluid level
Innovative design
Specially designed for deviated and horizontal wells

Technique

Oil extraction site showcasing underground piping and pumping systems, with oil rigs in the background.
  • Energy savings thanks to low energy demand
  • No risk to the environment (no dynamic seal on the surface)
  • Maximum safety (no risk of the sucker rod turning backwards)
  • Low investment costs
  • Different versions for different requirements
  • Ability to pump high concentrations of sand or other solids
  • Ability to pump high levels of free gas
  • No valves or reciprocating parts to clog, block gas or wear out
  • Low shear rates (prevents emulsification of liquid by agitation)
  • High-performance downhole PMM with sensorless drive control technology
  • Smaller footprint
NameStator size (inch)Pressure max. (bar)Capacity max. (m³/d at 100 rpm)Speed (rpm)
NETZSCH ESPCP 1661.662401.1500
NETZSCH ESPCP 2382.3/82403.2500
NETZSCH ESPCP 2782.7/830032500
NETZSCH ESPCP 3503.1/230080500
NETZSCH ESPCP 4004240120500

Further sizes and technical data on request.

Two engineers discussing a technical document near a large industrial machine, emphasizing collaboration in a manufacturing environment.

Worldwide service and support for your pump and system 

Our service and support do not end with the purchase. From consultation, spare parts and maintenance to the repair and modernisation of your pump - we support you right from the start. 

Thanks to our worldwide service network, we are ready for you around the clock in case of an emergency.

Spare parts, documents, data

Discover MyNETZSCH, your digital customer portal.

Register for free now

Applications NEMO® ESPCP pump systems

Your contacts and companies at NETZSCH

Any specific questions? Contact us for help or fill in the contact form.

FAQ progressing cavity pumps

Progressing cavity pumps are particularly suitable for pumping highly viscous, abrasive, solid-laden or shear-sensitive media. Typical applications include the chemical, food, environmental, paper and building materials industries, as well as the oil and gas sector.

NEMO®progressing cavity pumps from NETZSCH Pumps & Systems are characterised by gentle, low-pulsation pumping, high dosing accuracy and a wide range of applications. They enable a constant delivery rate even with changing pressures and media compositions.

Progressing cavity pumps can be used to convey low-viscosity to highly viscous media, including slurries, suspensions, pastes, media with a high solids content, and sensitive or gas-laden liquids.

Yes, progressing-cavity pumps are self-priming and exhibit excellent suction performance. This makes them ideal for applications with changing fill levels or difficult suction conditions.

NEMO® progressing cavity pumps are available in numerous designs, including block, hopper and hygienic versions. In addition, various materials, seal variants, and rotor-stator combinations are available to optimally adapt the pump to the respective application.

Maintenance requirements are low and predictable. Wear parts such as the rotor and stator can be easily replaced. Maintenance-friendly designs enable short downtimes and high plant availability.

The service life depends on factors such as the medium, speed, pressure and choice of materials. Professional design and the use of original spare parts ensure a long service life and economical operation.

All relevant original spare parts are available for progressing cavity pumps from NETZSCH Pumps & Systems, including rotors, stators, seals, joint parts and other wear-related components. The spare parts are precisely matched to the pump design and ensure high operational reliability.

The correct spare part can be identified by the machine number, serial number, or item number. Spare parts lists, sectional drawings and the operating and maintenance instructions also provide support. Alternatively, the NETZSCH Pumps & Systems service team can provide expert advice on selecting the right original spare part.

The experts at NETZSCH Pumps & Systems will assist you in the design, selection and integration of the right progressing cavity pump – tailored to your specific pumping tasks and process requirements.

AI Overview
An error occurred. Please try again.